Mitsubishi MOTORS Outlander PHEV 2016 Owner'S Manual Download Page 41 | Manualshive

Page: 41 / 490

Mitsubishi MOTORS Outlander PHEV 2016 Owner'S Manual Download Page 41

WARNING

l

If the POWER or CHARGING indicator does not illuminates or the FAULT indicator blinks or illuminates during normal charging, please contact
a MITSUBISHI MOTORS Authorized Service Point.

l

Do not charge when the EV charging cable is coiled up.
The cable may be heated and resulting in fire.

l

Do not alter or disassemble the EV charging cable. Doing so could cause fire, an electric shock or injury.

l

Be sure to install the cap to the normal charge connector and store the EV charging cable in a place where the cable is not exposed to water or dust.
Entry of foreign matter such as water or dust in the metal terminal of the normal charge connector or charging cable plug may cause a fire or
malfunction.

l

Never force the connection if the EV charging cable or connector shows damage or is not easily connected due to foreign material entering the
connector or the outlet. And never use an outlet that is worn, damaged, or will not hold the plug firmly. Doing so could cause fire, an electric shock,
or short circuit.

l

Pay attention to the following for handling the EV charging cable.
Damage to the cable could cause fire, an electric shock, or short circuit.

•

Do not drop the cable or do not give strong impact to it.

•

Do not pull or bend with undue force.

•

Do not twist.

•

Do not drag.

•

Do not put an object on top.

•

Do not put the cable close to a heating unit including heater.

CAUTION

l

Do not connect the normal charge cable to an outlet that has a lower rating than the current value described on the control box.

NOTE

l

All indicators are illuminated momentarily for confirming operation when the charging cable plug is inserted into an outlet. After that the POWER indicator
and the CHARGING indicator is continuously illuminated.

l

The CHARGING indicator will start to blink when the charging is completed. The POWER indicator is continuously illuminated while the charging cable
plug is inserted into an outlet.

EV charging cable

3-09

OGGE16E1

Charging

3

«
...
39
40
41
42
43
...
»

Summary of Contents for Outlander PHEV 2016











































































































































































































































































































































































































































































































Reviews:

No comments