Mitsubishi MOTORS Lancer 2005, Workshop Manual Supplement

Page: 9 / 109

MPI <4G63>
ï
General Information
MPI <4G63>
ï
General Information
13D-4
OTHER CONTROL FUNCTIONS
1. Fuel Pump Control
Turns the fuel pump relay ON so that current
is supplied to the fuel pump while the engine
is cranking or running.
2. A/C Relay Control
Turns the compressor clutch of the A/C
ON and OFF.
3. Fan Motor Control
The revolutions of the radiator fan and
condenser fan are controlled in response to
the engine coolant temperature and vehicle
speed.
4. Purge Control Solenoid Valve Control
5. EGR Control Solenoid Valve Control
GENERAL SPECIFICATIONS
Item Specification
Throttle body Throttle bore mm 60 Throttle body Throttle bore mm 60
Throttle position sensor Variable resistor type
Idle speed control servo Stepper motor type
Engine-A/T-
ECU Identification No. E6T37983
Sensors Air flow sensor Karman vortex type
Barometric pressure sensor Semiconductor type
Intake air temperature sensor Thermistor type
Engine coolant temperature sensor Thermistor type
Oxygen sensor Zirconia type
Inhibitor switch Contact switch type
Camshaft position sensor Hall element type
Crank angle sensor Hall element type
Detonation sensor Piezoelectric type
Power steering fluid pressure switch Contact switch type
Actuators
Engine control relay Contact switch type
Fuel pump relay Contact switch type
Injector type and number Electromagnetic type, 4
Injector identification mark HDA250E Injector identification mark HDA250E
EGR control solenoid valve Duty cycle type solenoid valve
Purge control solenoid valve Duty cycle type solenoid valve
Fuel pressure
regulator Regulator pressure kPa 328