Mitsubishi MOTORS Eclipse 1997, Service Manual

Page: 465 / 540

CHASSIS ELECTRICAL Rear Combination Light and Back-up Light
OPERATION
Taillight
l
The taillight relay is switched ON when the
lighting switch is set to the or “HEAD”
position.
l As a result, electricity flows via dedicated fuse
No. 5 to each light, and each light illuminates.
Back-up light
l
When, with the ignition switch at
position, the shift lever (or the selector lever)
is moved to the
position, the back-up light
switch is switched ON (or the transaxle
range switch Engine (Non-turbo)
park/neutral position switch Engine
(Turbo) and Engine is
switched to the position), and the back-up
light illuminates.
Tool number and name
502
Scan tool (MUT-II)
ROM pack
529
Diagnostic trouble
codecheckhamess
Stop light
l
Battery voltage is always applied to the stop
light switch through the dedicated fuse No. 2.
l
When the brake pedal is pressed, the stop
light switch will be turned “ON” to turn on the
stop lights.
Lighting monitor buzzer
l
When, with the tail light illuminated (lighting
the ignition switch is turned
off and
the driver’s door is opened (door switch is
switched ON), the ECU detective circuit will
function.
With the detective circuit activated, buzzer
output makes the buzzer sound, continuously
to remind that the taillight is illuminated.
Supersession
502
Tool not necessary if
scan tool
is
available
A p p l i c a t i o n
input check-
ing
ETACS-ECU input signal check-
ing (when ysing a
TSB Revision