Mitsubishi MOTORS Eclipse 1997, Service Manual

Page: 392 / 540

System Engine
ENGINE ELECTRICAL
and
I
I
I
Wear limit line
(2) Check the outer diameter of the commutator.
Standard value: 29.4 mm (1.158 in.)
Limit: 28.4 mm (1.118 in.)
(3) Check the depth of the undercut between
Standard value: 0.5 mm in.)
,
BRUSH HOLDER CHECK
Check for continuity between the brush holder the
brush holder.
The normal condition is
BRUSH CHECK
(1) Brushes that are worn beyond wear limit line, or oil-s&d,
. .
(2) brush, slide brush brush
holder by retaining
OVERRUNNING CLUTCH CHECK
(1) While holding clutch housing, rotate the pinion. Drive
pinion should rotate smoothly in one direction, but should
not rotate in opposite direction. If clutch does not
properly, replace overrunning clutch assembly.
(2) Inspect pinion for wear or burrs. If pinion is or burred,
replace overrunning clutch assembly. If pinion is damaged,
also inspect ring gear for wear or burrs.