Mitsubishi MOTORS Eclipse 1997, Service Manual

Page: 474 / 540

CHASSIS Liaht
OPERATION
Glove light vanity light
l
If the lighting switch is set at “TAIL” or “HEAD”,
l
In this case, the timer circuit in the
the contact point of the taillight is closed
will be activate gradually vary the voltage
“ON” the taillight relay,
for approx. 6 seconds owing to the duty
l When the glove compartment is opened, the
and the ‘voltage will be to power
glove compartment light switch is switched “ON”
transistor. Since the voltage applied to the dome
and the glove compartment light
light gradually the dome light
illuminates.
be dimmed.
l
When the vanity mirror lid is opened, the vanity
l
If the ignition switch is turned to while
mirror light switch is switched and the
the donie light is lit (while the timer is activated),
vanity light illuminates. the timer circuit will be opened to turn
Dome light
power transistor.
l
Battery voltage is always applied to the dome
This off the
light.
without,
When the dome switch is turned to “ON”, the
Foot lights
dome light will remain lit. After either door is Battery voltage is always applied to the foot
opened if the dome light switch is at “DOOR”
lights.
position, the dome light will come on.
l
If either door or is opened, the foot
lights will come on.
l After all doors and are closed, the foot
lights will be dimmed.
Scan tool (MUT-II)
Diagnostic trouble
code check harness
TSB