Mitsubishi MOTORS Colt 2009 Owner'S Manual Download Page 208

Page: 208 / 449

Starting and driving

4-47

Traction control system (TCL)/

Active stability control system (ASC)

E00611700033

The traction control system (TCL)/active stability control sys-

tem (ASC) takes overall control of the anti-lock brake system,
traction control system and active stability control system to

help maintain the vehicle’s control and traction. Please read

this section in conjunction with the page on the anti-lock brake
system, traction control system and active stability control sys-

tem.

Anti-lock brake system (ABS)

→

P. 4-41

Traction control system (TCL)

→

P. 4-48

Active stability control system (ASC)

→

P. 4-48

NOTE

●

Immediately after the vehicle starts moving after engine
start up, a whining sound of a motor will be heard from

the engine compartment. If the brake pedal is depressed at

that moment, a brake pedal pulsating is felt.
This whining sound and pulsation are due to the self-diag-

nosis operation of the traction control system (TCL)/
active stability control system (ASC) and does not indi-

cate a malfunction.

●

Some vibration will be felt in the vehicle body and a
whining sound of a motor will be heard from the engine

compartment when the traction control system (TCL)/

active stability control system (ASC) functions. This is a
normal result of the traction control system (TCL)/active

stability control system (ASC) operation, and does not

indicate a malfunction.

●

The traction control system (TCL)/active stability control

system (ASC) does not operate while the ABS warning

lamp is illuminated.

CAUTION

●

Do not over-rely on the traction control system
(TCL)/active stability control system (ASC). Even

when the traction control system (TCL)/active sta-

bility control system (ASC) is operating, there are
limits to the system and its ability to maintain con-

trol and traction. Reckless driving may lead to acci-

dents. Always drive carefully, taking account of the
road conditions.

●

Be sure to use the same specified type and size of

tyre on all 4 wheels. Otherwise, there is a possibility
that the traction control system (TCL)/active stabil-

ity control system (ASC) will not work properly.

Summary of Contents for Colt 2009


































































































































































































































































































































































































































































Search results

Summary of Contents for Colt 2009

Reviews:

Related manuals for Colt 2009

Brands by name

Popular brands

Mitsubishi MOTORS Colt 2009, Owner'S Manual

Search results

Summary of Contents for Colt 2009

Reviews:

Related manuals for Colt 2009

Brands by name

Popular brands