Mitsubishi MOTORS Colt 2009, Owner'S Manual

Page: 145 / 449

3-34
Instruments and controls
3
Headlamp flasher
E00506300043
The high beams flash when the lever is pulled slightly to (2),
and will go off when it is released.
When the high beam is on, the high beam indicator lamp in the
instrument cluster will also illuminate.
NOTE
●
The high beams can also flash when the lamp switch is
OFF.
●
If you turn the lamps off with the headlamps set to high-
beam illumination, the headlamps are automatically
returned to their low-beam setting when the lamp switch
is next turned to the “
” position.
Coming home light
E00528800019
This function turns on the headlamps in the low-beam setting
for about 30 seconds after the ignition switch is turned to the
“OFF” position.
1. Turn the ignition switch to the “OFF” position and
remove the ignition key.
2. Within 60 seconds of turning the ignition switch to the
“OFF” position, pull the turn-signal lever toward you.
3. The headlamps will come on in the low-beam setting for
about 30 seconds.
NOTE
●
The coming home light function operates only when the
combination headlamps and dipper switch is set to the
“ ” (OFF) or “AUTO” position.
●
While the coming home light function is operating, per-
form one of the following operations to cancel the func-
tion and turn off the headlamps.
• Pull the turn-signal lever toward you.
• Turn the combination headlamps and dipper switch to
the “ ” or “ ” position.
• Turn the ignition switch to the “ON” or “ACC” position.
●
If the coming home light function is cancelled, the igni-
tion switch must be turned to the “ON” or “ACC” position
before the function can be operated again.
●
It is possible to change the operating interval for the head-
lamps and to disable the function.
For details, we recommend that you consult a
MITSUBISHI MOTORS Authorized Service Point.