Mitsubishi MOTORS Colt 2009, Owner'S Manual

Page: 123 / 449

3-12
Instruments and controls
3
NOTE
●
“---” is displayed when the average speed
cannot be measured.
●
The initial (default) setting is “Auto reset
mode”.
●
The memory of the manual reset mode or
auto reset mode for the average speed dis-
play is erased if the battery is disconnected.
Allshift lever position display*
E00528100012
Shows the position of the allshift lever.
Refer to “Allshift lever position and multi-infor-
mation display” on page 4-29.
Outside temperature display
E00528400015
This displays the temperature outside the vehi-
cle.
NOTE
●
The display setting can be changed to the
preferred units (°C or °F).
Refer to “Changing the function settings
(when the ignition switch is “ON”)” on
page 3-18.
●
The outside temperature can be displayed in
a range of -40°C to 50°C (-40°F to 122°F).
●
Depending on factors such as the driving
conditions, the displayed temperature may
vary from the actual outside temperature.
Frozen road warning
E00528500016
If the outside air temperature drops below
approx. 3°C, the alarm sounds and the outside air
temperature warning symbol flashes for about 10
seconds.
Gearshift indicator*
E00528600020
The gearshift indicator (if so equipped) shows
recommended gearshift points for fuel-efficient
driving.
Refer to “Changing gears” on page 4-26.
Refer to “Driving” on page 4-34.
CAUTION
!
●
There is a danger the road might be
icy, even when this symbol is not flash-
ing, so please take care when driving.