Mitsubishi Heavy Industries SRK60ZJX-S, Technical Manual

Page: 130 / 272

- 129 -
'10 • SR-T-091
(b) Sleep timer operation
Pr essing the SLEEP button causes the temperature to be controlled with respect to the set temperature .
(7) Timer operation
(a) Comfortable timer setting (ON timer)
(c) OFF timer operation
The Off timer can be set at a specific time (in 10-minute units) within a 24-hour period.
If the timer is set at ON when the operation select switch is set at the cooling or heating, or the cooling or heating in auto mode
operation is selected, the comfortable timer starts and determines the starting time of next operation based on the initial value
of 15 minutes and the relationship between the indoor temperature at the setting time (temperature of room temperature sensor)
and the setting temperature.
(8) Installation location setting
When the indoor unit is installed at the end of a room, control the air flow direction so that it is not toward the side walls. If you set
the remote controller installation position, keep it so that the air flow is within the range shown in the following figure.
(a) Setting
1) If the air conditioning unit is running, press the ON/OFF button to stop.
The installation location setting cannot be made while the unit is running.
2) Press the AIR FLOW


(UP/DOWN) button and the
AIRFLOW   (LEFT/RIGHT) button together for 5 seconds
or more.
The installation location display illuminates.
3) Setting the air-conditioning installation location.
Press the AIR FLOW
 
(LEFT/RIGHT) button and adjust to the desired
location.
Each time the AIR FLOW
 
(LEFT/RIGHT) button is pressed, the
indicator is switched in the order of:
4) Press the ON/OFF button.
The air-conditioner's installation location is set.
Press within 60 seconds of setting the installation location (while the
installation location setting display illuminates).
Airflow range Airflow range Airflow range
(Left End Installation) (Center Installation) (Right End Installation)
,
(Center Installation) (Right End Installation) (Left End Installation)