12-66
Simple inspection and service
6 Replacement
Be sure to flush the cooling system when replacing
the coolant.
1. Place a can under the radiator drain cock to
receive the coolant.
2. Remove the cap from the reservoir tank.
3. Tilt the cab.
If the vehicle is a Crew-cab model vehicle,
uncover the power steering fluid and engine
coolant level inspection opening.
WARNING
•
Do not replace the coolant immediately
after operating the vehicle since the
engine, radiator, coolant, and other items
will be extremely hot. If you try to drain the
coolant immediately after driving the vehi-
cle, you may be scalded. Give the coolant
time to cool before starting the job.
•
Never remove the engine’s pressure cap
while the coolant is still hot. Carelessly
removing it is dangerous since boiling
coolant and hot steam will gush out and
could scald you. Only after the coolant has
cooled down sufficiently, remove the
engine’s pressure cap by gripping it in a
folded piece of thick cloth and opening it
slowly.
•
Tighten the engine’s pressure cap before
operating the engine. If the engine speed
is increased with the pressure cap left
open, steam and boiling coolant will over-
flow from the pressure cap opening as its
temperature rises.
Z09378
Z21944
Summary of Contents for CANTER
Page 23: ...2 1 Labels inside the cab 2 3 Exterior labels 2 6 2 Warning labels ...
Page 325: ...12 23 Z22021 FG ...
Page 454: ...13 35 Z22249 Z21702 ...
Page 464: ...15 1 15 Alphabetical index ...