10-10
Interior equipment and accessories
•
Scan-tuning button
•
Channel selection button
5. Adjust the balance of sound level between the
right and left speakers with the power switch/
volume control knob/balance control knob and
the bass and treble with the tone control knob.
6. To turn off the radio, press the power switch/vol-
ume control knob/balance control knob once
again.
3 Clock
3.1
Setting the time
1. Press the band selector button for two or more
seconds; a short beep will be heard and the
time-of-day display will start flashing.
2. Press the tuning button to adjust the time.
Use the
side to set the hour and press the
side to set the minutes.
If you want to change the hour or minutes
quickly, keep the button pressed.
3. After the time has been set, press the band
selector button.
NOTE:
•
Seconds cannot be adjusted.
•
The time can be adjusted even if the radio is
turned off as long as the starter switch remains
in the “ACC” or “ON” position. If adjusted when
the radio is turned off, however, the clock does
not produce any beep.
•
When the time indication in the display has
flashed for 15 seconds, the indicated time is set.
Z11577
Z11564
Z11564
Z11575
Summary of Contents for CANTER
Page 23: ...2 1 Labels inside the cab 2 3 Exterior labels 2 6 2 Warning labels ...
Page 325: ...12 23 Z22021 FG ...
Page 454: ...13 35 Z22249 Z21702 ...
Page 464: ...15 1 15 Alphabetical index ...