10-9
1.11 Display
Time-of-day/frequency
This area normally displays the time-of-day.
When the radio is turned on or an automatic tun-
ing button is pressed, a radio station frequency
appears in this area for approximately five sec-
onds. When the radio is turned off, only the
time-of-day is displayed.
AM/FM/PM
•
AM
“AM” appearing in this area during the time-of-
day display indicates “before noon”.
During the station frequency display, “AM”
means that the radio is in the AM broadcast
receiving mode.
•
FM
“FM” appears in this area when the radio is in
the FM broadcast receiving mode.
•
PM
“PM” appearing in this area indicates “after
noon”.
1, 2
“1” and “2” represent frequency bands 1 and 2.
During an AM broadcast reception, either “AM1”
or “AM2” is displayed according to the frequency
band selected.
The display in this area becomes “FM1” or
“FM2” when the radio is in the FM broadcast
receiving mode.
Indicates that the alarm is ON.
CH
Indicated in this area is the number of the chan-
nel selection button corresponding to the station
the radio is currently tuned to.
ST
“ST” appears in this area when an FM stereo
broadcast is being received.
2 To listen to the radio
1. Extend the antenna.
2. Press the power switch/volume control knob/
balance control knob to turn on the radio. Turn
the knob to adjust the volume.
3. Select either AM or FM mode by pressing the
band selector button.
Select a desired frequency band from among
AM1, AM2, FM1 and FM2 when you use the
channel selection button for tuning.
4. Tune the radio to a desired station by using any
of the following buttons:
•
Tuning button
Z11576
Z22005
Summary of Contents for CANTER
Page 23: ...2 1 Labels inside the cab 2 3 Exterior labels 2 6 2 Warning labels ...
Page 325: ...12 23 Z22021 FG ...
Page 454: ...13 35 Z22249 Z21702 ...
Page 464: ...15 1 15 Alphabetical index ...