REV 1.4
61
LAMP WILL EXCHANGE SOON
1.10.6. Warning indication (for VS-50XLW20U)
You can indicate the warning mark to induce to replace the spare lamp and the
pre-announcement of auto-lamp changing on screen. It can be set in WARNING menu in
INDICATION in the system menu (chapter 1.5.3.11, on page 24).
[Warning mark to induce to replace the spare lamp]
“
☀
” mark is displayed on screen when the spare lamp is required to
replace after the auto-lamp changing (in other word, when the spare
lamp status is “USED”, “JUNK” or no attaching). It blinks once in 5
seconds.
The mark will disappear when the spare lamp is replaced to “NEW”
(new or not-deteriorated lamp). Even if the spare lamp status is not
“NEW”, you can erase the indication by resetting the spare lamp
operating time (on page 58).
[Pre-announcement of auto-lamp changing]
The message shows when the brightness deterioration is detected. The
auto-lamp changing starts after 5-minute displaying.
