VS-50XL20U, VS-67XL20U, VS-50XLW20U
Set-up and Installation Manual
10
7. Place the next bottom row projector on the
base stand and fix it in the same way.
8. Join the right and left projectors at 4 points
with supplied hexagon socket head bolts,
spring washers and flat washers.
9. Place the upper projectors on the assembled
unit.
10. Fix them vertically and horizontally at 4 points
each with supplied hexagon socket head bolts,
spring washers and flat washers.
11. Stop up the holes in both sides that are not
used for multi-screen with joint hole seals.
Caution
To avoid the units from falling, measure
the horizontal and vertical degrees with
the level etc. and make sure the units
are stably assembled.
1.2.6.2. Space adjustment between the screens
1. Temporarily attach the screen units, which
were detached in the previous step (for
VS-67XL20U, the screens were supplied
separately).
2. Put the spacers between each screens and
adjust the screen gaps to be 1 mm for
VS-50XL20U/VS-50XLW20U or 2 mm for
VS-67XL20U.
3. Firmly tighten the 4 screen fixing screws.
1mm
(2mm)
1mm
(2mm)
Joint hole seal