REV 1.4
23
1.5.3.7. OFFSET (When the input board is selected)
This adjustment is normally unnecessary.
Used to finely adjust the horizontal/vertical position and size if the picture outline is shifted after
the final 6-axis adjustment.
[Procedure]
1. Select OFFSET in MISC FUNCTION in the system menu.
2. H.POSITION: to adjust horizontal position.
3. V.POSITION: to adjust vertical position.
4. H.SIZE
：
to adjust horizontal size.
5. V.SIZE
：
to adjust vertical size.
1.5.3.8. BAUD RATE
Used to select the transmission speed of RS-232C in accordance with the external controller. You
can select 9,600bps or 19,200bps.
[Procedure]
1. Select BAUD RATE in MISC FUNCTION in the system menu.
2. Set 9600 or 19200.
1.5.3.9. SYSTEM SYNC
Used to set 60Hz or 50Hz in accordance with the vertical synchronizing signal of mainly
displayed moving pictures. Set 60Hz for NTSC signal or 50Hz for PAL signal. Make sure that all
projectors are set the same system sync setting in a multi-screen.
[Procedure]
1. Select SYSTEM SYNC in MISC FUNCTION in the system menu.
2. Set 60 or 50.
1.5.3.10. IMAGE FLIP
Used to invert the displayed image vertically or horizontally. Normally set S/W in cube projector.
•
S/W: Normal image
•
W/N: Vertically flip image
•
S/E: Horizontally flip image
•
N/E: Vertically/horizontally flip image
[Procedure]
1. Select IMAGE FLIP in MISC FUNCTION in the system menu.
2. Set S/W, W/N, S/E or N/E.