6 - 18 6 - 18
MELSEC-Q
6 UTILITY PACKAGE (GX Configurator-DN)
[Explanation of items]
(1) Items
Setting item:
Displays I/O signals and buffer memory names.
Current value:
Monitors the I/O signal states and present buffer memory values.
Setting value:
Enter or select values to be written into the buffer memory for test
operation.
(2) Command buttons
Write to module
Writes parameters to the flash ROM of the QJ71DN91.
Read from module
Reads parameters from the flash ROM of the
QJ71DN91.
Save file
Saves parameters on the hard disk, etc.
Load file
Reads parameters saved on the hard disk, etc.
Current value display Displays the current value of the item selected. (This is
used to check the text that cannot be displayed in the
current value field. However, in this utility package, all
items can be displayed in the display fields).
Make text file
Creates a file containing the screen data in text file
format.
Start monitor /
Stop monitor
Selects whether or not to monitor current values.
Execute test
Performs a test on the selected items. To select more
than one item, select them while holding down the
Ctrl key.
Close
Closes the screen that is currently open and returns to
the previous screen.
REMARK
The "Execute test" operation is explained below, using an example of writing data to
"Failed Node Detection Setting".
(1) Change the setting value for "Node 1" to "Do not detect".
Nothing is written to the QJ71DN91 at this point.
(2) Click the setting value field of "Node 1" to select.
To write more than one setting item at the same time, select the items while
holding down the Ctrl key.
(3) Click Execute test to execute the write operation.
Upon completion of writing, the display in the current value field will change to
"Do not detect".
Summary of Contents for QJ71DN91
Page 1: ...DeviceNet Master Slave Module User s Manual QJ71DN91 GX Configurator DN SW1D5C QDNU E ...
Page 2: ......
Page 233: ......
