Mitsubishi Electric Q66DA-G, User Manual

Page: 77 / 190

5
UTILITY PACKAGE (GX Configurator-DA)
5.1 Utility Package Functions
5
- 1
1
OV
E
R
VI
EW
2
SYSTE
M
CO
N
F
IG
UR
A
T
IO
N
3
S
P
E
CI
F
ICA
T
ION
S
4
SE
T
U
P
AN
D
PR
OCE
D
U
R
ES
B
E
FOR
E
OP
ER
A
T
ION
5
UTILITY
P
ACKAGE
(GX CONF
IGURA
T
OR-
DA)
6
PROGRAMMING
7
ON
LI
N
E M
O
D
U
LE
CHANGE
8
T
R
OU
B
LES
H
O
O
T
IN
G
5 UTILITY PACKAGE (GX Configurator-DA)
5.1 Utility Package Functions
Table 5.1 shows an overview of the utility package functions.
Table5.1 Utility package (GX Configurator-DA) function list
Item Reference section Description
Initial setting
*1
(1) Set the following items that require initial setting.
• D/A conversion enable/disable setting
• Scaling enable/disable setting
• Scaling upper limit value/lower limit value
• Rate control enable/disable setting
• Increase/decrease digital limit value
• Disconnection detection setting
• Warning output setting
• Warning output upper limit value/lower limit value
(2) The data for which initial setting has been completed is registered in the
parameters for the programmable controller CPU, and automatically writ-
ten to the Q66DA-G when the programmable controller CPU changes to
RUN status.
Section 5.4
Automatic refresh
setting
(1) Sets automatic refresh for the Q66DA-G buffer memory.
(2) The buffer memory that was set for automatic refresh is automatically read
and written to the specified device when the END command for the pro-
grammable controller CPU is executed.
Section 5.5
Monitor/Test
(1) Monitor/Test
The buffer memory and I/O signals for the Q66DA-G are monitored and
tested.
(2) Operating condition setting
Changes the initial setting during operation.
(3) Offset/gain setting
When setting the offset/gain to a value selected by the user (when the
analog output range setting is user range setting), the offset and gain can
be easily set while viewing the screen.
(4) Pass data
The pass data (Pass data classification setting, Industrial shipment set-
tings offset/gain value, User range settings offset/gain value) can be mon-
itored and set.
Section 5.6
FB conversion
Generates FB automatically from the intelligent function module parameter
(initial setting/auto refresh setting).
Section 5.7