Mitsubishi Electric Q66DA-G, User Manual

Page: 96 / 190

5
- 20 5.6 Monitoring/Test
5.6.1 Monitor/test screen
5
UTILITY PACKAGE (GX Configurator-DA)
5.6 Monitoring/Test
5.6.1 Monitor/test screen
[Purpose]
Start buffer memory monitoring/testing, I/O signal monitoring/testing, operating condi-
tion setting, offset/gain settings (refer to Section5.6.2) and pass data (refer to Sec-
tion5.6.3) from this screen.
[Operating procedure]
"Select monitor/test module" screen "Start I/O No.
*1
" "Module type" "Module
model name"
*1 Enter the start I/O No. in hexadecimal.
The screen can also be started from System monitor of GX Developer Version 6 or
later.
Refer to the GX Developer Operating Manual for details.
[Setting screen]
X/Y monitor/test
1)
Operating setting