Mitsubishi Electric PUMY-P200YKM, Technical & Service Manual

Page: 7 / 126

7
3
SPECIFICATIONS
Service Ref.
PUMY-P200YKM
PUMY-P200YKM-BS
Power source 380/400/415 V, 50 Hz
Cooling capacity
(Nominal)
kW *1 22.4
kcal/h *1 19,300
BTU/h *1 76,400
Power input kW 6.05
Current input A 9.88, 9.39, 9.05
COP kW/kW 3.70
Temp. range of
cooling
Indoor temp. W.B. 15 to 24°C
Outdoor temp. D.B. −5 to 46 °C
Heating capacity
(Nominal)
kW *2 25.0
kcal/h *2 21,500
BTU/h *2 85,300
Power input kW 5.84
Current input A 9.54, 9.06, 8.74
COP kW/kW 4.28
Temp. range of
heating
Indoor temp. D.B. 15 to 27°C
Outdoor temp. W.B. −20 to 15 °C
Indoor unit
connectable
Total capacity 50 to 130% of outdoor unit capacity
Model / Quantity 15 - 250 / 12
Sound pressure level
(measured in anechoic room)
dB <A>
56/ 61
Power pressure level
(measured in anechoic room)
dB <A>
-
Refrigerant
piping diameter
Liquid pipe mm (in) 9.52 (3/8)
*3
Gas pipe mm (in) 19.05 (3/4)
FAN *2 Type x Quantity Propeller Fan x 2
Air flow rate m3/min 139
L/s 2,316
cfm 4,908
Control, Driving mechanism DC control
Motor output kW 0.20 + 0.20
External static press. 0
Compressor Type x Quantity Scroll hermetic compressor x 1
Manufacturer Siam Compressor Industory Co., Ltd.
Starting method Inverter
Capacity control % Cooling 25 to100
Heating 17 to 100
Motor output kW 5.3
Case heater kW 0
Lubricant FV50S(2.3litter)
External finish Galvanized Steel Sheet
Munsell No. 3Y 7.8/1.1
External dimension HxWxD mm 1338 x 1050 x 330(+25)
in 52-11/16 x 41-11/32 x 13 (+1)
Protection devices High pressure protection High pressure Switch
Inverter circuit (COMP./FAN) Overcurrent detection, Overheat detection(Heat sink thermistor)
Compressor Compressor thermistor, Over current detection
Fan motor Overheating, Voltage protection
Refrigerant Type x original charge R410A 7.3 kg
Control
Electronic Expansion Valve
Net weight kg (lb) 138 (305)
Heat exchanger Cross Fin and Copper tube
HIC circuit (HIC: Heat Inter-Changer) HIC circuit
Defrosting method Reversed refrigerant circuit
Drawing External BK01N339
Wiring BH79J199
Standard
attachment
Document Installation Manual
Accessory Joint pipe x 1, Grounded lead wire x2
Optional parts Joint: CMY-Y62-G-E
Header: CMY-Y64/68-G-E
* 1 Nominal cooling conditions * 2 Nominal heating conditions
Indoor : 27 °C D.B./19 °C W.B. [81 ° F D.B/66 ° F W.B.] 20 °C D.B. [68 ° F D.B.]
Outdoor : 35 °C D.B. [95 ° F D.B.] 7 °C DB/6 °C W.B. [45 ° F D.B./43 ° F W.B.]
Pipe length : 7.5 m [24-9/16 ft] 7.5 m [24-9/16 ft]
Level difference : 0 m [0 ft] 0 m [0 ft]
Note : 1. Nominal conditions * 1, * 2 are subject to ISO 15042.
2. Due to continuing improvement, above specifications may be subject to change without notice.
*3 Liquid pipe diameter: 12.7 mm, in case of further piping length is longer than 60 m.
Unit converter
kcal/h = kW × 860
BTU/h = kW × 3,412
cfm = m3/min x 35.31
lb = kg/0.4536
Above specification data is
subject to rounding variation.
OCH575