Mitsubishi Electric PH50 series, Setup And Installation Manual

Page: 109 / 122

REV 2.5
109
4.4.2.2. Additional items (When ANALOG or S.ANALOG is selected)
With remote control Wallaby menu Page
H.TOTAL “Sampling Number (H Total)” in “A/D Setting” 55, 63
FINE “Sampling Phase (Fine)” in “A/D Setting” 55, 60
CLAMP START “Pulse Position” in “Clamp Pulse” in “A/D Setting” window
CLAMP WIDTH “Pulse Width” in “Clamp Pulse” in “A/D Setting” window
56, 63
MASK START “Hold Start” in “PLL Hold (V-Mask)” in “A/D Setting” window
MASK END “Hold End” in “PLL Hold (V-Mask)” in “A/D Setting” window
56, 63
SYNC SELECT “Sync Select” in “A/D Setting” window 56, 64
CLOCK RANGE “Sampling Frequency Range” in “A/D Setting” window 56, 64
AUTO GAIN “Auto Adjust…” in “Amp Gain” in “A/D setting”
AMP GAIN
MANUAL GAIN “Gain” and “Level” in “Amp Gain” in “A/D setting”
54, 61
SIGNAL-TYPE “Signal Type” 64