PH50, XL50, XL21 series Set-up and Installation Manual
24
3. Pull up the bottom of the screen unit to rotate 90
degrees with pushing flip-up lock levers located inside
the screen unit in both sides.
6
6
7
7
”
”
: The levers can be unlocked
respectively.
Be careful not to push the
adjacent screen-detaching lever.
1.2.7.2. Screen closing
Be careful not to trap your fingers during the work.
1. Push down the bottom of the screen slowly till locked.
2. Press down the slide lock levers in both sides to unlock,
and push the screen unit along the rail till the end.
6
6
7
7
”
”
: The levers can be
unlocked respectively.
Note:
Depending on the screen gap
adjustment (chapter 1.2.6.5, on page
21), the screen unit may touch the top
edge of the lower screen. In this case,
slightly lift the upper screen to close
without touching.
Flip-up lock lever (inside the screen unit)
Slide lock lever (inside the arm)
(Screen-detaching lever)
Push
Summary of Contents for PH50 series
Page 122: ......
