Mitsubishi Electric MR-J4 TM Series, Instruction Manual

Page: 49 / 594

1. FUNCTIONS AND CONFIGURATION
1 - 32
(b) MR-J4-350TM4
(1)
(3)
(2)
Side
(4)
(5)
(6)
(7)
(Note)
The broken line area is the same as
MR-J4-200TM4 or less.
No. Name/Application
Detailed
explanation
(1)
Main circuit power connector (CNP1)
Connect the input power supply. Section 3.1
Section 3.3
(2) Rating plate Section 1.6
(3)
Control circuit power connector (CNP2)
Connect the control circuit power supply and
regenerative option.
Section 3.1
Section 3.3
(4)
Servo motor power output connector (CNP3)
Connect the servo motor.
(5)
Charge lamp
When the main circuit is charged, this will light.
While this lamp is lit, do not reconnect the cables.
(6)
Protective earth (PE) terminal Section 3.1
Section 3.3
(7)
Battery holder
Install the battery for absolute position data backup. Section
12.2
Note. Lines for slots around the battery holder are omitted from the illustration.