Mitsubishi Electric MR-J4 TM Series, Instruction Manual

Page: 393 / 594

11. OPTIONS AND PERIPHERAL EQUIPMENT
11 - 66
11.9 Selection example of wires
POINT
To comply with the IEC/EN/UL/CSA standard, use the wires shown in app. 4 for
wiring. To comply with other standards, use a wire that is complied with each
standard.
For the selection example when the servo amplifier is used with the DC power
supply input, refer to app. 1.3.
Selection conditions of wire size is as follows.
Construction condition: Single wire set in midair
Wire length: 30 m or less
The following diagram shows the wires used for wiring. Use the wires given in this section or equivalent.
5) Power regeneration converter lead
Power regeneration
converter
N-
3) Regenerative option lead
Regenerative option
2) Control circuit power supply lead
C
P+
L1
L2
L3
L11
L21
1) Main circuit power supply lead
Power supply
Servo amplifier
U
V
W
M
4) Servo motor power supply lead