28
The network information currently set in EcoWebServer III is reflected to the IP address setting (Before) and IP
address setting (After) in CH1 and CH2.
(9) Change the IP address in IP address settings (new).
(The following figure shows an example of changing the IP address to 10.123.234.10. Type an IP address,
subnet mask, and default gateway to be used for operation.)
(10) Type a maintenance password (factory default:
ecopass
) in
Password
and click
Apply
.
In the confirmation dialog box that appears after you click
Change
, click
Yes
.
When the IP address configuration is complete, the following dialog box appears. Click
OK
.
