10
3. Names and Functions of Parts
*1
Demand control section requires for additional power.
It is necessary to connect AC100 to 240V (+10%,-15%) 50/60Hz to V1,V2 in demand terminal block.
It is possible to take the power from the power supply section
Do not use UPS, SAG and etc. to supply the power.
7-segment LED display
Displays an error code when an
error is detected on the product.
Also displays the IP address set in
the product when you start it up in
the IP address display mode.
Front
Contact output terminal block
Contacts are closed when surveillance
conditions are satisfied. Connect
external devices such as buzzers or
lamps.
CC-Link
Station number setup switch
CC-Link
Transmission speed
setup switch
LED indications
Indicates the statuses of the
product.
LAN interface CH2
Used to connect programmable
logic
controllers,
GOT,
or
MODBUS
®
terminal.
CC-Link terminal block
Connect a CC-Link
communication cable.
LAN interface CH1
Used to connect a PC.
USB interface
Unused.
LED indications
Indicates the statuses of
the product.
Demand control
terminal block
necessary voltage for
demand monitoring.
Connected by dedicated
pulse cable. (*1)
BAT.SW
Switch for the
backup battery
build-in the unit.
TS
Time adjustment
when connected to
transaction meter.
Power supply
section *1
Server
section
CC-Link
communication
section
Contact
output
section
Demand
control
section
EcoServer
Ⅲ
