25
7. IP Address Setting
7.1 Setting an IP address
(1) Install setting software to computer.
(2) Connect this product via a LAN straight cable or crossover cable to a PC that has the configuration software installed
in it.
(3) Take a note of the IP address set in the PC.
PC's IP address
:
.
.
.
PC's subnet mask
:
.
.
.
PC's default gateway
:
.
.
.
(4) Change the IP address set in the PC according to the IP address (factory setting: 192.168.10.1) set in the product.
IP address set in the product
IP address to be set to the PC
192.168.10.1
192.168.10.xx
xx is a value from 2 to 254.
* The upper 3 digits should be consistent
with those for the product.
(5) Use the configuration software to set an IP address for EcoWebServerIII. Run the EcoWebServerIII setting software.
As the following sample by Windows
®
7, displayed content might be different by OSs and installed applications.
[Start menu] > [All Programs] > [Mitsubishi Energy Saving Management Assistance] > [EcoWebServerIII
(MES3-255C-DM-EN)]
> Click [Model: MES3-255C-DM-EN Configuration Software ver3].
You can also launch the configuration software by double-clicking the
Model: MES3-255C-DM-EN Setting
Software ver3
icon on the desktop.
After a few seconds, the following project management window appears.
