Mitsubishi Electric MELSERVO MR-J2 C Series, Instruction Manual

Page: 111 / 265

5 - 2
5. PARAMETERS
5.1.2 Lists
POINT
For any parameter whose symbol is preceded by*, set the parameter
value and switch power off once, then switch it on again to make that
parameter setting valid.
For details of the parameters, refer to the corresponding items.
(1) Item list
Class No. Symbol Name and Function Initial Value Unit
Customer
Setting
0 *STY Command system, regenerative brake option selection 0000
1 *FTY Feeding function selection 0000
2 *OP1 Function selection 1 0002
3 AUT Auto tuning 0102
4 *CMX Electronic gear numerator 1
5 *CDV Electronic gear denominator 1
6 INP In-position range 100 pulse
7 PG1 Position loop gain 1 36 rad/s
8 *ZTY Home position return type 0010
9 *ZRF Home position return speed 500 r/min
10 CRF Creep speed 10 r/min
11 ZST Home position shift distance 0
m
12 CRP Rough match output range 0 10
STM
m
13 JOG Jog speed 100 r/min
14 *STC S-pattern acceleration/deceleration time constant 0 ms
15 *SNO Station number setting 0 station
16 *BPS Communication baudrate 0000
17 MOD Analog monitor output 0100
18 *DMD Status display selection, alarm history clear 0000
B
asi
c pa
ra
m
et
ers
19 *BLK Parameter write inhibit 0000
Downloaded from ManualsNet.com search engine