A - 8
Compliance with the EMC and Low Voltage Directives
(1) For programmable controller system
To configure a system meeting the requirements of the EMC and Low Voltage Directives when
incorporating the Mitsubishi programmable controller (EMC and Low Voltage Directives compliant)
into other machinery or equipment, refer to Chapter 9 "EMC AND LOW VOLTAGE DIRECTIVES" of
the QCPU User's Manual (Hardware Design, Maintenance and Inspection).
The CE mark, indicating compliance with the EMC and Low Voltage Directives, is printed on the
rating plate of the programmable controller.
(2) For the product
For the compliance of this product with the EMC and Low Voltage Directives, refer to Section 7.5
Wiring.
(3) CE marking conformity combination module
This module conforms to CE marking standard in a condition to make combination use with
following current censor and cable.
current censor
EMU-CT50，EMU-CT100，
EMU-CT250，EMU-CT400，
EMU-CT600
EMU2-CT5-4W
cable or
current censor cable
CE marking cable (twisted pair cable )
Single wire:
φ
1.2mm (
φ
0.5 - 1.2mm)
Stranded wire: 1.3mm
2
(0.5 - 1.3 mm
2
)
EMU2-CB-Q5A-4W
EMU2-T1M, EMU2-T5M
EMU2-T10M, EMU2-T1MS
EMU2-T5MS, EMU2-T10MS
Max. cable length
50m
11m
Product configuration
The following describes the product configuration.
Model name
Product name
Quantity
QE81WH4W
Energy Measuring Module (for three-phase 4-wire)
1
