1. EXPLANATION OF MODULE FUNCTIONS
1.1 FX2N-80BMT-NC Card
II
-2
[Connector layout diagram]
RIO2
U:DI-R
L:DI-L
U:ENC2
L:ENC1
SW2
DCIN
DO-L
SW1
PROG.
PORT
RIO1
CP
U
-E
PO
WE
R
RU
N
RIOE
RR
1
RIOE
RR
2
[Explanation of settings]
SW1
RUN-STOP slide switch
Starts running when the switch is set to RUN, and
stops when set to OFF.
SW2
Remote I/O station No.
0 to 7: Corresponds to the RIO station No. 0 to 7
setting rotary switch
(Set an even number)
8 and following: Loop back test mode (for testing)
(If the base I/O occupies 0 and 1, set the switch to 2.)
[Explanation of LEDs]
POWER
(Green) 5V power output
This turns ON when the state is normal.
display
RUN
(Green) Operation display
When the unit power is turned ON, the self-diagnosis
function activates. If there is no error, the operation
state is entered ("RUN" LED turns ON).
CPU-E
(Red) CPU error display
RIOERR1
(Red) Communication alarm in onboard RIO 0th station
RIOERR2
(Red) Communication alarm in onboard RIO 1st station
Downloaded from
