104-
Settings
Call barring
This network dependent service forbids certain outgoing or incoming call types. It requires a
call barring password.
To bar a call
To remove call barring or check its status
Call barring password
The call barring password is used to select the call barring levels. It is supplied via your service
provider.
To change the password:
Security features
The security features described in this section protect your phone from unauthorised use.
When prompted, enter the code and press
OK
. Codes are displayed as asterisks (*).
Press the [Clear] key if you need to amend your entry.
KEEP A RECORD OF YOUR CODES IN A SECURED PLACE.
PIN code
Your SIM card was provided with a 4 to 8 digit PIN code for protection against unauthorised
use. When enabled, the PIN code is required each time you turn your phone on. If an incorrect
PIN code is entered three times in succession, your SIM card will be blocked. The 8 digit PUK
code is then required to unblock your phone. Please contact your service provider for this code.
To activate the PIN protection:
To change the PIN code (PIN must first be enabled):
PIN2 code
PIN2 code prevents unauthorised access to some of the phone features (e.g. activating/deac-
1
Press the [Menu/T9] key.
Select
Settings
.
2
Select
GSM Services
.
3
Select
Call barring
.
4
Select
Outgoing calls
(to bar All outgoing calls, International calls or International calls
excluding your Home network),
Incoming calls
(to bar All incoming calls or all incoming calls
while Roaming only),
Cancel all
(to cancel all barring conditions) or
Change password
.
5
Select
Activate
. Enter the password and press
OK
.
The network then confirms the selection.
1
Press the [Menu/T9] key.
Select
Settings
.
2
Select
GSM Services
.
3
Select
Call barring
.
4
Scroll up or down to select the barring type to be deactivated (Cancel) or checked and follow
the instructions displayed.
1
Press
the [Menu/T9] key.
Select
Settings.
2
Select
GSM Services
.
3
Select
Call barring
.
4
Select
Change password
.
First enter the former password then enter the new password twice. A Confirmation message
is displayed.
Avoid using codes similar to emergency numbers such as 112 to prevent the accidental dialling of these numbers.
1
Press the [Menu/T9] key.
Select
Settings
.
2
Select
Security
.
3
Select
PIN enable
(if the code has been disabled)
or
PIN disable
(if the code has been
enabled) and enter your
PIN code
.
1
Press the [Menu/T9] key.
Select
Settings
.
2
Select
Security
.
3
Select
PIN change
and follow the information displayed.
4
Press
OK
to validate your new PIN code.
