M800W/M80W Series Connection and Setup Manual
42 Appx.5: Restrictions for Lithium Batteries
640
IB-1501268-K
42.1 Restriction for Packing
When transporting lithium batteries with means such as by air transport, measures corresponding to the United Nations
Dangerous Goods Regulations (hereafter called "UN Regulations") must be taken.
The UN Regulations classify the batteries as dangerous goods (Class 9) or not dangerous goods according to the lithium
metal content. To ensure safety during transportation, lithium batteries (battery unit) directly exported from Mitsubishi are
packaged in a dedicated container (UN package) for which safety has been confirmed.
When the customer is transporting these products with means subject to the UN Regulations, such as air transport, the
shipper must follow the details explained in the section "Transportation Restrictions for Lithium Batteries: Handling by User".
The followings are restrictions for transportation. Each restriction is specified based on the recommendation of the United
Nations.
42.1.1 Target Products
The following Mitsubishi NC products use lithium batteries. If the lithium metal content exceeds 1g for battery cell and 2g for
battery, the battery is classified as dangerous good (Class9).
In order to avoid an accidental actuation during the transportation, all lithium battery products incorporated in a machinery or
device must be fixed securely and must be shipped with wrapped over the outer package as to prevent damage or short-
circuits.
(1) Materials falling under Class 9
(2) Materials not falling under Class 9
(Note)
If the number of batteries exceeds 24 batteries for the battery cell or 12 batteries for the battery, the dedicated
packing (for materials falling under Class 9) is required.
Area
Transportation method
Restriction
Special clause
World
Air
ICAO, IATA
-
World
Marine
IMO
188
United States
All (air, marine, land)
DOT
49 CFR 173.185
Europe
land
RID, ADR
-
Mitsubishi type
(Type for arrangement)
Battery type
Lithium metal
content
Number of
incorporated
batteries
Application
(Data backup)
Battery
class
Outline dimension
drawing
CR23500SE-CJ5
CR23500SE-CJ5
1.52g -
For NC SRAM
(M500)
Battery
cell
Refer to "Battery Option" in
the specification manual for
drive unit you are using for
the outline dimension
drawing for servo.
Mitsubishi type
(Type for arrangement)
Battery type
Lithium metal
content
Number of
incorporated
batteries
Application
(Data backup)
Battery
class
Outline dimension
drawing
CR2032
(for built-in battery)
CR2032
0.067g
-
For NC SRAM/
Battery
cell
Refer to "Battery Option" in
the specification manual for
drive unit you are using for
the outline dimension
drawing for servo.
CR2450
(for built-in battery)
CR2450
0.173g
-
For NC SRAM
ER6, ER6V series
(for built-in battery)
ER6, ER6V
0.65g
-
For NC SRAM/
servo encoder
MR-BAT
ER17330V
0.48g
-
For servo encoder
Q6BAT
Q6BAT
0.57g
-
For NC SRAM
MDS-BAT6V1SET
2CR17335A
1.2g
2
For servo encoder
Battery
MR-BAT6V1SET
Summary of Contents for M800W Series
