Mitsubishi Electric M800W Series, Connection And Set Up Manual

Page: 505 / 702

M800W/M80W Series Connection and Setup Manual
23 Sequence Program Writing
466 IB-1501268-K
23.8 Setting the Communication with GX Works2
To create the machine sequence and user safety sequence of the CNC, use the Mitsubishi integrated FA software GX
Works2, which is the PLC development tool for the Mitsubishi PLC MELSEC Series.
When using GX Developer, refer to "Setting the Communication with GX Developer".
(1) Start the setting screen by the following operation in the navigation window on GX Works2.
Select [Connection Destination], then double-click [Current Connection].
(2) Set the following items in the order of the list.
(a) For the machine sequence
(*1) Double-click [Ethernet Board] to display the setting item.
(*2) Double-click [Ethernet Module] to display the setting item.
(*3) Double-click [Other Station (Single network)] to display the setting item.
(*4) Double-click [Ethernet] to display the setting item.
■
Transfer Setup Connection 1 screen
Machine sequence: Control circuit created to control the machine tools (ladder circuit)
User safety sequence:
Control circuit of the safety-related I/O observation created with the smart safety observation
function (ladder circuit)
Item Setting Note
PC side I/F Ethernet Board
Network No. 1 (*1)
Station No. 1 (*1)
Protocol TCP (*1)
PLC side I/F Ethernet Module
Type name QJ71E71 (*2)
Station No. 1 (*2)
IP Address IP address of CNC (*2)
IP Input Format DEC. (*2)
Station No. <-> IP information Automatic Response System (*2)
Other Station Setting Other Station (Single Network)
Check at communication time (sec.) Any time period (from about 10 seconds) (*3)
Retry times 0 (*3)
Network Communication Route Detailed setting
of Ethernet
Access to Ethernet module set on PCL side I/F (*4)