M800W/M80W Series Connection and Setup Manual
4 General Specifications
111
IB-1501268-K
(6) RIO3EXT (Remote I/O 2.0 communication)
(7) RIO3 (Remote I/O 2.0 communication)
<Cable side connector type>
Connector : 1-1318119-3
Contact : 1318107-1 x6
Manufacturer: TE Connectivity
Refer to the following chart for the maximum number of connecting stations and I/O points to the connector
RIO3.
Refer to the following chart for the maximum number of connecting stations and I/O points to the connector
RIO3EXT.
(*)
FCU8-DX730 occupies 11 stations, but 13 stations are occupied in total since the graphic control unit
occupies 2 stations.
(Note 1) Refer to the section "General Specifications: Remote I/O Unit" for the number of occupying stations and I/
O points of remote I/O units.
(8) EMG (Emergency stop connection)
- Be sure to connect EMG terminal cable (G123) to the connector when not used.
<Cable side connector type>
Connector : 50-57-9403
Contact : 0016020103
Manufacturer: MOLEX
A
B
1
I/O
TXRXD
1
I/O
TXRXD*
2
NC
2
0V
3
FG
3
NC
Operation panel I/O unit type
Max. number of stations
(RIO3 connection)
Max. number of I/O points
(RIO3 connection)
FCU8-DX830/DX834/DX837
49 stations
(5th, 6th, 15th to 19th, and 23rd to
64th stations can be used)
1568 points/ 1568 points
Operation panel I/O unit type
Max. number of stations
(RIO3EXT connection)
Max. number of I/O points
(RIO3EXT connection)
FCU8-DX730 (*)
51 stations
(3rd to 6th, 15th to 19th, and 23rd
to 64th stations can be used)
1632 points/ 1632 points
1
FG
2
I
EMG IN
3
O
+24V
1 2 3
B
A
X
1
2
3
Summary of Contents for M800W Series
