Mitsubishi Electric GUG-01SL-E, Technical Manual

Page: 32 / 76

29
CHAPTER
7
Remote Controller PZ-01RC /
3. Appearance
3. Appearance
Display
The main display can be displayed in two different modes: “Full” and “Basic” . The factory setting is “Full” .
Fri
Mode Temp.
Fan
Room
Cool Set temp.
Fri
Cool
Mode Temp.
Set temp.
This function is not available.
Fan speed
Appears while power is ON.
Preset temperature appears here.
Appears when the ON/OFF operation is
centrally controlled.
Current time appears here.
Appears when the buttons are locked.
Dx-coil unit operation mode appears here.
Appears when the operation mode is
centrally controlled.
Preset temperature
Operation mode
Appears when the ON/OFF timer
function is enabled.
Appears when the preset temperature is
centrally controlled.
Appears when the Weekly timer is
enabled.
Appears when the preset temperature
range is restricted.
Functions of the corresponding buttons
appear here.
Button function guide
Appears with room temperature.
Clock
Current room temperature appears here.
Please erase room temperatures in the
initial setting when the SA temp. control
is selected.
Room temperature
Full mode
Basic mode
* All icons are displayed for explanation.
Function buttons
Press to turn ON/OFF the Dx-coil unit.
ON/OFF button
This lamp lights up in green while the
unit is in operation. It blinks while the
remote controller is starting up or when
there is an error.
Press to save the setting.
Main display : Press to change the operation mode.
Main menu : Press to move the cursor down.
Press to return to the previous screen.
Main display : Press to decrease temperature.
Main menu : Press to move the cursor up.
Press to bring up the Main menu.
Main display : Press to increase temperature.
Main menu : Press to go to the previous page.
Operation settings will appear.
When the backlight is off, pressing any
button turns the backlight on and it
will stay lit for a certain period of time
depending on the screen.
Main display: Not available.
Main menu: Press to go to the next page.
ON/OFF lamp
SELECT button
Function button F1
RETURN button
Function button F2
MENU button
Function button F3
Backlit LCD
Function button F4
Fri
Room
Set temp.
Mode Temp.
Cool
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
The functions of the function buttons
change depending on the screen.
Refer to the button function guide that
appears at the bottom of the LCD for the
functions they serve on a given screen.
When the system is centrally controlled,
the button function guide that
corresponds to the locked button will
not appear.
Main display Main menu
Function guide
Controller interface
• When the backlight is off, pressing any button turns the backlight
on and does not perform its function. (except for the
ON/OFF
button)
• Most settings (except ON/OFF, mode, temperature) can be made
from the Menu screen.