(33/71)
Change of date format
In date format setting, you can choose from “YYYY.MM.DD”, “MM.DD.YYYY” or “DD.MM.YYYY” format.
On the date indication in operating mode, press for more than two seconds to transition to date format setting and
enable the following operations.
*Caution: The date is not indicated in operating mode when the logging unit
is not connected.
Set the date format.
YYYY.MM.DD DD.MM.YYYY MM.DD.YYYY
Date indication
(YYYY.MM.DD)
Date format setting
(MM.DD.YYYY)
Set the date format to “MM.DD.YYYY” format.
If you want to change to the other format, go back to date
indication and then change format.
The display transitions to “MM.DD.YYYY” format indication (as
shown in the left figure). One second later, it transitions to date
indication (as shown in the right figure) automatically.
Date indication
(MM.DD.YYYY)
Date format setting
(DD.MM.YYYY)
Set the date format to “DD.MM.YYYY” format.
If you want to change to the other format, go back to date
indication and then change format.
The display transitions to “DD.MM.YYYY” format indication (as
shown in the left figure). One second later, it transitions to date
indication (as shown in the right figure) automatically.
Date indication
(DD.MM.YYYY)
Date format setting
(YYYY.MM.DD)
Set the date format to “YYYY.MM.DD” format.
If you want to change to the other format, go back to date
indication and then change format.
The display transitions to “YYYY.MM.DD” format indication (as
shown in the left figure). One second later, it transitions to date
indication (as shown in the right figure) automatically.
Date indication
(YYYY.MM.DD)
Press “+ / PHASE”
for more than 2sec
Press “+ / PHASE”
for more than 2sec
Press “+ / PHASE”
for more than 2sec
+ / PHASE
