manualshive.com logo in svg

Mitsubishi Electric Artisan MELSEC-A, Manual

The Mitsubishi Electric Artisan MELSEC-A is a cutting-edge industrial automation system, offering superior precision and reliability. To fully harness its potential, a comprehensive user manual is essential. Download the free manual now from manualshive.com to maximize the performance of your MELSEC-A system.

Share
Download
background image

The existing wiring can be used by using the conversion adapter of the upgrade tool 
(manufactured by Mitsubishi Electric Engineering Co., Ltd.) for replacing MELSEC-AnS Series with 
MELSEC-L Series. It is unnecessary to drill additional holes, and the man-hour for replacement can 
be reduced.

Solution and Benefit

2.3 Replace AnS/QnAS (Small Type) Series with L Series

2.3.1 Replace using A (Small Type) upgrade tool

(manufactured by Mitsubishi Electric Engineering Co., Ltd.)

■

 Conversion adapter

  There are available two types of conversion adapters, one for using the existing AnS module 

terminal block without making changes to the wiring and the other for type conversion for connector 

type input/output modul

es with different types of connectors.

■

 Space module

  If the wires of the existing terminal block are thick and interfere with the adjacent module, the 

conversion adapter to be used may not be mounted. In this case, the wiring space can be secured 

to eliminate the interference by installing the space module LG69 on the left of the newly mounted 

module.

  When the space module LG69 is used, the number of modules per block is restricted. For details,  

refer to "Transition from MELSEC-AnS/QnAS (Small Type) Series to L Series Handbook 

(Fundamentals)."

■

 Base adapter

  The base adapter integrated with DIN rail is used to mount the L Series base unit using the existing 

mounting holes for the AnS/QnAS Series base unit. 

When the base adapter is used, it is unnecessary to fit the DIN rail, and the man-hour for 

replacement can be reduced.

With space module installed

Space module

L Series module

AnS/L conversion 
adapter

Wiring terminal block removed 
from AnS Series module

56

2.3 Replace AnS/QnAS (Small Type) Series with L Series

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Artisan MELSEC-A







































































































































































































Reviews:

No comments

Related manuals for Artisan MELSEC-A

UE 120 Series Installation And Maintenance Instructions preview
120 Series
Brand: UE Pages: 4
XBOX 360 Manual preview
360
Brand: XBOX Pages: 7
Saitek P880 User Manual preview
P880
Brand: Saitek Pages: 44
Baccara G75-DFC Installation Operation & Maintenance preview
G75-DFC
Brand: Baccara Pages: 16
BABYSTYLE OYSTER Instruction Manual preview
OYSTER
Brand: BABYSTYLE Pages: 8
BABYSTYLE Hybrid 2 Manual preview
Hybrid 2
Brand: BABYSTYLE Pages: 32
Danfoss VLT 2800 Instruction Manual preview
VLT 2800
Brand: Danfoss Pages: 7
IDK SWC-2000 User Manual preview
SWC-2000
Brand: IDK Pages: 96
Jedia JMA-5104 Operating Instructions Manual preview
JMA-5104
Brand: Jedia Pages: 12
JED Micro T470 User And Installation Manual preview
T470
Brand: JED Micro Pages: 10
JCM Technologies SESAME Rapid Installation Manual preview
SESAME
Brand: JCM Technologies Pages: 2
Parker DFB Series Operation Manual preview
DFB Series
Brand: Parker Pages: 28
Vacon 100 HVAC User Manual preview
100 HVAC
Brand: Vacon Pages: 50
V2 Easy3 Manual preview
Easy3
Brand: V2 Pages: 116
V2 WES-BASE Manual preview
WES-BASE
Brand: V2 Pages: 8
V2 CITY2+ Instruction Manual preview
CITY2+
Brand: V2 Pages: 25
V2 CITY1-EVO Manual preview
CITY1-EVO
Brand: V2 Pages: 124
Zeta Premier MX-16 Installation And Commissioning Manual preview
Premier MX-16
Brand: Zeta Pages: 44

Brands by name

Popular brands

Load more brands