Parameters (functions) and instruction codes under different control methods
81
4
Instruction codes are used to read or write parameters through the Ethernet network (Modbus/TCP or CC-Link IE Field Network Basic).
(Refer to
for the details of the Modbus/TCP, and
for the details of the CC-Link IE Field Network Basic.)
Function availability under each control method is as follows:
: Available
: Not available
For "parameter copy", "parameter clear", and "all parameter clear", "
" indicates the function is available, and "
" indicates the function is not
available.
Communication parameters that are not cleared by Parameter clear (All parameter clear) through the Ethernet network (Modbus/TCP or CC-
Link IE Field Network Basic). (Refer to
for the details of the Modbus/TCP, and
for the details of the CC-Link IE Field Network
Basic.)
Position control is enabled when an MM-CF IPM motor is used with the low-speed range high-torque characteristic enabled (
Pr.788 Low speed
range torque characteristic selection
= "9999" (initial value)).
FR-A800-E only
