Mitel INT4000, User Manual, Page: 15 / 62

Mitel ® INT4000 User Guide – Issue 6, December 2008
Page 3
Getting Started
Basic Message Display Functions
Basic Button Functions
In addition to the buttons identified in the preceding table, your endpoint has a Special button
(
). Depending on how your telephone system is configured, you may need to press this
button before you dial a feature code.
Icon Function Action
The connection has been
made between the
handset and the base unit. Press to answer or make a call.
The handset ringer switch
is turned off. Press and hold on the side of handset
to turn the ringer on.
The handset battery pack
is low and needs to be
charged. See “Charging the Handset Battery Pack” on page 8
for information on charging the battery.
TALK
ON/OFF MUTE
Button If You.. You Can... Page
Press Answer a call, place an internal
call, or hang up. 16
CALL or LINE
Press an unlit button or the
flashing button Select an outside line or answer a
call. 17
Press and dial the
destination number
Transfer a call. 19
Press Put a call on hold. 18
Press Change a channel. 16
Press Redial a telephone number or save
the last number dialed. 21
Press Adjust volume during a call or
select a ring tone on standby
mode. 27
Press and hold for
two seconds
Turn the ringer on and off. 27
Press Mute the microphone. 18
NOTES
Because the telephone system allows customized feature buttons, your endpoint
may have been reprogrammed so that the feature buttons do not match those
described in this guide.
To use the Backspace button, you must preprogram the feature button (feature
code 314) on your endpoint. Refer to “Programming Your Feature Buttons” on
page 31 for details on how to program the Backspace button. Your system
administrator must program FORWARD, PREVIOUS, NEXT, or MSG buttons in
Database Programming.
TALK TALK
XFER XFER
HOLD HOLD
CH CH
REDIAL REDIAL
RING/VOL RING/VOL
ON/OFF MUTE ON/OFF MUTE
ON/OFF MUTE
SPCL