Mitel INT4000, User Manual, Page: 43 / 62

Mitel ® INT4000 User Guide – Issue 6, December 2008
Page 31
Call Features
Programming Your Feature Buttons
Depending on how your system is programmed, some of your feature buttons may be
“user-programmable.” If so, you can program them with any of the feature codes listed in the
back of this user guide or with extension numbers. In addition, you can combine the feature
button and Station Speed-Dial functions to program a feature button to dial an outside number.
To program a user-programmable feature button:
1. Dial .
2. Press the feature button you want to program.
3. Dial the feature code or extension number you want to store under that button. (Refer to
the back of this guide for default feature codes.)
To return all feature buttons to their original default values:
Dial
.
To display the current feature button values:
1. Dial
.
2. Press the feature button(s) you want displayed.
3. Press .
Using Account Codes
If your telephone system is programmed to use the Station Message Detail Recording (SMDR)
feature, you might be required to enter account codes when you place a call. These codes add
information to telephone record reports that the system will periodically print.
There are three types of account codes:
•
Standard account codes are automatically entered into the SMDR report whenever your
place a call.
•
Forced account codes must be dialed before you can place an outside call.
•
Optional account codes can be entered at any time during a call.
To enter an optional account code:
Press and
.
Enter the optional account code. If the account code is not immediately accepted, press .
To set an account code for all calls placed from your endpoint:
Dial and then the account code. If the account code is not immediately accepted,
press . This code will be used for all calls made from your endpoint until it is disabled.
To disable the code:
Dial and press .
3 9 7
3 9 5
3 9 6
TALK
SPCL
3 9 9
#
3 9 1
#
3 9 1
#