Mitel INT4000, User Manual, Page: 49 / 62

Mitel ® INT4000 User Guide – Issue 6, December 2008
Page 37
Call Features
4. Press to begin the search.
5. Press to dial a number or activate a feature code while the entry is displayed.
*The character available depends on the software version.
Programming Remote Feature Access
If you are away from your desk and forgot to put your endpoint in DND, don’t worry. With the
Remote Feature Access, you can place your endpoint in DND or forward calls from any other
endpoint on the system. And, if you have a special dial-up line, you can access your endpoint
features from an outside line.
Remote Access Password
Before you use Remote Feature Access, you should program a password, as described below.
To change the password from your endpoint:
1. Dial
.
2. Enter your current password, followed by
.
3. Enter the new password followed by
.
You hear a confirmation tone.
4. Enter the new password again for verification followed by
.
You hear a confirmation
tone.
To change the station password using remote programming, see the following section.
Number of Times to Press Button
Button 1 2 3 4 5
1
- & ( ) 1
2
A B C ' 2
3
D E F ! 3
4
G H I * 4
5
J K L # or /
*
5
6
M N O N or #
*
6
7
P Q R S 7
8
T U V ? 8
9
W X Y Z 9
0
@ : . , 0
#
#
3 9 2
#
#
#