Mitel INT4000 User Manual Download Page 8 | Manualshive

Page: 8 / 62

Mitel INT4000 User Manual Download Page 8

Page vi

Mitel

®

INT4000 User Guide – Issue 6, December 2008

Notice to Canadian Customers

The Class A

digital apparatus complies with Canadian ICES-003.

Notice to U.S. Customers

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case users will be required to correct the interference at their own expense.

Notice to European Customers

We, Mitel Networks LTD.

Of, Mitel Castlegate Business Park

Portskewett

Caldicot

NP26 5YR

UK

Declare that for the hereinafter mentioned product the presumption of

conformity with the applicable essential requirements of

DIRECTIVE 1999/5/EC OF THE EUROPEAN

PARLIAMENT (RTTE DIRECTIVE) AND OF THE COUNCIL is given.

Mitel Endpoint: INT4000

Any unauthorized modification of the product voids this Declaration.

For a copy of the original signed Declaration of Conformity (in full conformance with EN45014), please contact the Regulatory
Approvals Manager at the above address.

Product Disposal Instructions

This symbol indicates that the product is classified as electrical or electronic equipment and should not be disposed of with
other commercial or household waste at the end of its working life. For appropriate disposal and recycling instructions,
contact your local Mitel provider.

The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) was established by the European Union to
minimize negative impact on the environment, control hazardous substances, and curtail landfill expansion by using the best
available recovery and recycling techniques.

«
...
6
7
8
9
10
...
»

Summary of Contents for INT4000































































Reviews:

No comments