47
Multi-line function
A multi-line phone has several directory numbers*. Each directory number is stored on a
programmable key.
This function is mainly used to program on the same phone:
- a standard number that you give to everyone.
- a private number that you only give to some people; this can also be an emergency num-
ber
Examples:
For a manager,
- the unfiltered private number,
- the number filtered by his assistant.
For an assistant, - the private number of his/her own calls,
- the number for receiving filtered calls of the manager.
Programming the multi-line function
*
Proceed as follows to program a line for each of these two directory numbers.
1 - Press the
Menu
Fox key.
2 - Select
Settings
and confirm.
3 - Select
Keys
and confirm.
-> The keys already programmed light up. The available keys
remain switched off.
4 - Select the key to be programmed.
5 - Select the
Line
option and confirm.
-> The directory numbers assigned to the phone are displayed.
6 - Select
Main line xxxx(0)
and then press
Add
.
The request is
accepted.
To repeat the operation on the second directory number:
7 - Press the second programmed key.
* Depending on the programming performed by the system operator.
Menu
Settings
Keys
Line
Main line xxxx(0)