67
8575
8575
A N/B Maintenance
A N/B Maintenance
Figure 2-8 Remove the fan’s power cord
Reassembly
1. Carefully, align the arrowhead corner of the CPU with the beveled corner of the socket, then insert CPU
pins into the holes. Tighten the screw by a flat screwdriver to locking the CPU.
2. Connect the fan’s power cord to the system board, fit the heatsink onto the top of the CPU and secure with
four screws.
3. Replace the keyboard .Then replace easy start buttons cover.
4. Disconnect the fan’s power cord from the system board, then lift up the heatsink. (Figure 2-8)
5. Loosen the screw by a flat screwdriver,upraise the CPU socket to unlock the CPU. (Figure 2-9)
Figure 2-9 Remove the CPU
