MIT TLG 100, User Manual

Page: 21 / 36

16
Installation Connection Diagram
PUMP BURNER
HEAT
SENSOR
SAFETY
SENSOR
OUTDOOR
AIR SENSOR
SIREN
ALARM RELAY CONTACT
TECHNICAL SPECIFICATIONS
Supply Voltage AC 210 ~ 230 V
Maximum Relay Output Power 2 kVA
Maximum Relay Output Current 1.5kW (cos
θ
=0.75)
Minimum Idle Current 10A
Sensor Type 150mA AC (500mA insured)
Safety Sensor Cutting Temperature (1) Two-wire NTC sensor (±%2)
Safety Sensor Commissioning Temperature (2) Maks. 97 ˚C Min. 93 ˚C
Temperature Sensor Measuring Range Maks. 64 ˚C Min. 60 ˚C
Extreme Temperature Limits (plastic sheathed ntc) 0 ~ 100 ˚C
Battery Current During Battery Fed Operation Maks. -40 ˚C Min. 150 ˚C
Average Battery Fed Operation Time Mod 1: 20 ~ 35 mA Mod 2: 8 ~ 10 mA
Available Battery Type ~ 5 hours
Rechargeable Battery Rechargeable Battery NiMh 9V
Battery Charging Method Constant Current and Constant Voltage
Battery Charge Current and Duration 10mA (20 hours)
Minimum Ambient Temperature -30 ˚C
Highest Ambient Temperature Storage 70 ˚C Operation 70 ˚C
Warning Output Voltage Type 10 ~ 220 Volts, Triac
Triac Output Current Nominal 0 ~ 10A Instantaneous Peak 160A
Burning control system is a digital thermostat control device designed for two-stage burners. For
each stage, activation temperature rage and pump activation temperature value can be adjusted.
There are five buttons on the board, and the user adjusts thermostat temperature, pump operation
and stopping temperature and external air compensated operation through these five buttons.