MIT TLG 100, User Manual

Page: 10 / 36

5
In LPG usage, especially on cold days, burner must not be operated when frosting or dewing is
observed on outer surfaces of pipes due to liquidation of gas fuel left in fuel pipes from night. The
liquid LPG must be safely drained from drain cock. (Liquidation may occur during normal times
due to the problem of evaporator level control or line regulator problem) In cold climate regions;
necessary measures should be taken to prevent water temperature in the installation falling below
freezing point. In workplaces where no works are carried out during night and on weekends,
circulation pomp must be run continuously. If heating is to be stopped for the long term, boiler
and system water should be drained. Antifreeze should not be used (antifreeze leads to corrosion
and lowering of thermal capacity of water.)
Ekin Endüstriyel is not responsible for the burner on the boiler. For settings related to burner and
commissioning process, contact to manufacturer company and make these processes carried
out by authorized services.
In the event of failure in burner, reset button on the burner should not be pressed more than twice.
If burner does not work again, related burner authorized service must be called.
If you feel or smell gas, or if there is a gas leak;
- Stay calm.
- Extinguish any burning fires.
- Open doors and windows.
- Close valves of all gas devices.
- Close valves at the entrance to the building.
- Do not burn matches, lighters, etc.
- Do not play with electric buttons.
- Do not operate electrical devices.
- Do not pull or insert plugs.
- Do not use bells.
- Do not use the phones in gas environment.
- Call number 187 and inform gas company and fire department.
To prevent shock hazard, do not remove coverings and board on the boiler. Do not play with
electric cables. Electrical operations related to boiler can only be carried out by authorized
service after taking all necessary precautions.
Before making any changes or any modifications, contact with the authorized service in our
province or call +90 (216) 232 24 12 to communicate with your technical service.
Do not attempt to repair yourself any malfunctions in the device.
The device must pass from the check once a year. These controls must be performed only by
Ekin Endüstriyel authorized services. Maintenance is not covered within the scope of warranty.
Alteration to be made in boiler, random structural changes and any similar changes are
prohibited. Such changes can cause damage to the device and endanger people. When these