Miranda Kaleido-X16, Hardware Description And Installation Manual

Page: 55 / 82

Kaleido-X16
Hardware Description & Installation Manual
49
ABT-128A rear panel layout
ABT-64A rear panel layout
Connections
Audio Inputs
The number and configuration of the audio inputs depends on the specific model of ABT you are using.
Reference Input (Looped Through)
An external reference signal is required to synchronize the SDTI outputs. An analog video reference signal,
word clock or AES-75 signal can be connected to one of the REFERENCE SIGNAL connectors. If the loop-
through is not used, a 75 ohm termination on the other REFERENCE SIGNAL connector must be used to
properly terminate the line.
For an Audio Bridge Terminal with an AES breakout panel, AES INPUT 1 can also be used for
synchronization. This input signal must be error-free PCM audio sampled at 48 kHz. In the case where both
REFERENCE SIGNAL and AES INPUT 1 have valid references, the signal connected to REFERENCE SIGNAL has
priority.
Multiplexed Audio Outputs
The multiplexed audio outputs are formatted to be compatible with the STDI audio input connections on
the KXI-16 series of cards.