27
4. Press SELECT to enable the User Presets Loading menu. The current User
Preset used is displayed.
5. Use the “+” or “-“ push-button to choose the desired User Preset. Press “+ “
and “-“ push-buttons simultaneously to set User Presets to
USR1
(default
setting).
6. Press SELECT to store the new User Preset selection.
LOAD
is displayed.
7. Press ESC to return to
CONF
.
3.10.2 Saving User Presets
When a configuration has been achieved, save it to a User Preset by following
these steps:
1. Press SELECT to enter the menu.
PROC
is displayed.
2. Press the “ + “ push-button until
CONF
is displayed.
3. Press
SELECT;
LOAD
is displayed. Press the “ + “ push-button until
SAVE
is
displayed.
4. Press SELECT to enable the User Presets Saving menu. The current User
Preset used is displayed.
5. Use “+” or “-“ push-button to select the desired User Preset number. Press “+
“ and “-“ push-buttons simultaneously to select
USR1
(default setting).
6. Press SELECT to save the configuration to this User Preset
. Note that this
overwrites any existing configuration that was saved previously under
that User Preset.
SAVE
is displayed.
7. Press ESC to return to
CONF
.
3.11 Factory Reset
It may be necessary, at times, to reset all parameters for 525 or 625-line inputs to
their original values programmed during manufacturing. Table 3.4 lists the default
values. To perform a factory reset follow these steps.
1. Press SELECT to enter the menu.
PROC
is displayed.
2. Press the “+“ push-button until
FACT
is displayed.
3. Press SELECT to enable the Factory Rest menu.
NO
is displayed.
4. Press the “+“ push-button to display
YES
.
5. Press SELECT to reset all parameter values to factory values for the current
video format. After the reset is complete, the DVP-101i returns to
FACT
.
NOTE: USER parameters, set remotely with the iControl option, are not reset to
their default values after a factor reset
.
3.12 Direct Access Controls
3.12.1 Freeze Pushbutton
The Freeze pushbutton activates a manual freeze, thus grabbing the video image
according to the Freeze Type selected in the menu. Refer to table 3.2
Freeze
types
for a description of the resulting frozen image.
3.12.2 Test Pushbutton
Summary of Contents for DVP-101i
Page 36: ...31 5 Schematic DIagrams ...