21
7. Press SELECT to store the new VBIT selection setting.
VBIT
is displayed.
8. Press ESC to return to
ABUS
.
9. To return to normal mode, press ESC.
Figure 3.3
Audio Muting During VBIT Presence
3.7 Ancillary Data Blanking Functions
3.7.1 HANC Blanking
Incoming horizontal ancillary data can be entirely blanked or can pass to the
digital video output. When the HANC is blanked, audio can still be de-embedded
and re-embedded since the blanking function is performed between the two
functions. Within the HANC Blanking menu are two available options for HANC
blanking:
PASS: All incoming HANC data is allowed to pass through to the output.
BLNK: All incoming VANC data is blanked.
To change VANC blanking setting follow these steps:
1. Press SELECT to enter the menu.
PROC
is displayed.
2. Press the “+“ push-button until
BLNK
is displayed.
3. Press
SELECT;
HANC
is displayed.
4. Press SELECT to enable the HANC Blanking menu. The current HANC
Blanking setting is displayed.
5. Use the “+” or “–“ push-button to choose the desired HANC Blanking setting.
Press the “+“ and “–“ push-buttons simultaneously to set HANC Blanking to
PASS
(default setting).
6. Press SELECT to store the new HANC Blanking setting.
HANC
is displayed.
7. Press ESC to return to
BLNK
.
8. To return to normal mode, press ESC.
VBIT
Audio
signal
Summary of Contents for DVP-101i
Page 36: ...31 5 Schematic DIagrams ...