Miranda DVP-101i, Manual To Installation And Operation

Page: 18 / 36

13
value. For example, if you are currently at TIMG-FRAM, pressing “+”
will scroll downwards through the selections VERT, HORZ and FINE.
Maintaining “+“ depressed during a value adjustment will increase the
parameter value at a faster rate.
-
: Press “–“ to move up in the menu or to decrease the parameter value.
For example, if you are currently at TIMG-HOR, pressing “–“ will scroll
upwards to the selection VERT and FRAM. Maintaining “–“ depressed
during a value adjustment will decrease the parameter value at a
faster rate.
SELECT: Changes to a menu parameter are stored immediately to non-volatile
memory. For example, in COMP-SETP, after the desired setup has
been chosen, press SELECT. The menu returns to SETP and the
new setup value is stored for the current format.
ESC:
If ESC is pressed after making changes to a parameter, the
parameter is reset to the value it had prior to the change. For
example, after changing the Cb value, press ESC. The menu returns
to Cb and the previous Cb value is reloaded .
Automatic Exit From Menu After 1-Minute Interval
If the menu is currently being accessed and no push-button has been pressed for
1 minute, the DVP-101i automatically exits from the menu, thereby returning to
normal mode. At the same time, changes made to the current parameter will be
stored.
Figure 3.2 DVP-101i Menu Structure
-
Home menu
(no unit)
PROC Y [-800,...,0,1,...,800]
S E E S
+
E S
+
-
Cb [-800,...,0,1,...,800]
E E
S
+
-
Cr [-800,...,0,1,...,800]
E E
S
+
-
SAT [-800,...,0,1,...,800]
E E
S
+
ALL [-800,...,0,1,...,800]
E E
S
+
(no unit)
(no unit)
(no unit)
(no unit)
-
BLAK [-100,...,0,1,...,100]
E
S
+
(no unit)
-
-
HUE [-180,...,0, 0.5,...,180]
E E
S
+
EQ [-32,...,0,1,...,32]
E E
S
+
(DEG)
(no unit)
HPOS [-14,...,0,1,...,14]
E
S
(PIX)
-
E
E
(continued next page)