GUIDE TO INSTALLATION AND OPERATION
88
| XVP-3901
•
The original position of the frame remains visible while the size or position is being changed, so the amount of
change can easily be seen
5.14 Reference panel
This group of parameters allows the selection of the
reference to be used by the XVP-3901.
Use the radio buttons in the Reference Source area to select
from the following options:
•
Auto – this mode selects the first source detected in this
order of priority:
o
External Reference input
o
URS
o
Selected Input signal
•
External – selects the signal connected to the rear-panel
REF IN connector
•
URS (Universal Reference Signal) – selects the internal
reference from the backplane
•
Input – uses the currently-selected input signal.
URS Format – use the radio buttons in the URS Format area
to select whether the URS is OFF, 29.97 Hz or 25 Hz.
•
When URS is OFF, the URS reference format source
cannot be selected, and will also be ignored by the
automatic detection mode.
5.15 A-BUS panel
When companion audio cards such as the DAP and UAP are
used to provide additional audio channels, the A-BUS audio
bus links the installed audio cards and the XVP-3901. This
panel is used to instruct the XVP-3901 about the presence of
installed audio cards and the system configuration.
Figure 5.75 Reference panel
Figure 3.74 Fingerprint panel – window resizing